Removing
Loosen the fastening nuts (1) expansion tank.
Move the expansion tank to the side.
Install clips (Ms. 583) to the expansion tank hoses.
Remove the expansion tank cap.
Drain the coolant from the expansion tank.
Remove with tool: (Mot. 1448) or pliers for clip-on collars:
- expansion tank inlet hose clamp,
- expansion tank outlet hose clamp.
Disconnect:
- expansion tank top hose
- expansion tank inlet hose.
Remove the expansion tank.
Installation
Be sure to replace the clips.
Attach:
- expansion tank inlet hose,
- expansion tank outlet hose.
Install with fixture: (Mot. 1448) or pliers for clip-on collars:
- expansion tank inlet hose clamp,
- expansion tank outlet hose clamp.
Fill the expansion tank with coolant.
Remove clamps from hoses (Ms. 583).
Install the expansion tank.
Torque tighten expansion tank nuts (8 Nm).
Top up the coolant level in the expansion tank.
Install the expansion tank cap.
Remove air from the engine cooling system.