Car headlights and lighting Renault 19

Lighting — design description
Visibility limits The part of the road visible in the headlights was supposed to be a measure of speed when you are driving in the dark. At the same time, good and precisely set headlights increase your safety level. In...

Removal and installation of headlights
The headlight is fixed in the upper part of the body with two bolts (2), as well as on the left and on the right, one SW 10 bolt is installed in the cutout of the headlight. To inner bolt (1) You can only get to after...

Headlight adjustment check
The position of the headlight housing relative to the horizontal axis is changed by the adjusting bolt «1», and relative to the vertical axis with an adjusting bolt «2». The adjusting bolts are located, respectively, on...

High beam adjustment
Since 9/89 in Germany, the law provides for the presence of a beam adjustment on a new car. To do this, on the Renault 19, the headlight range is adjusted in steps, according to the load with the dipped beam on, using...

High Beam Adjustment Check
1. Position the car, as when adjusting the headlights, at a distance of 5 m in front of the garage wall. 2. Check the adjustment of the headlights in the position of the regulator «0» and correct it if necessary. 3. Set...

Replacing lamps in lighting devices
Front direction indicators 1. Through the engine compartment, remove the turn signal spring retainer from the main headlight housing. 2. Remove the direction indicator outside. 3. Release the bayonet lock by turning it...

Installing fog lights
As elegant and vibration-free as the original fog lights shown here, additional fog lights can be fitted. The main condition for this is the presence of original parts from Renault, as described below. In addition,...