Removing the charge air cooler
1. Remove shock absorbers.
2. Remove the inner and outer grille.
3. Disconnect the air inlet and outlet hoses from the charge air cooler.
4. Remove the left wing protection.
5. Unscrew the top bolt of fastening of a radiator of cooling of charge air.
6. Turn off the bottom bolt of fastening of a radiator of cooling of charge air from the side.
7. Raise the charge air cooler and remove it from the mount.
8. Remove the radiator from the engine compartment.
9. When installing the radiator, make sure that its wire does not touch the wheel.
10. At the same time, make sure that the radiator is properly fastened.
11. A particularly important element of the assembly is the correct and tight installation of air hoses on the radiator pipes.
![](https://www.renaultbook.ru/img/etc/0060.jpg)
The hot air coming from the turbocharger passes through the hose (3) and under pressure enters the charge air cooling radiator (2) and after cooling through the outlet hose (1) goes to the intake manifold of the engine.