11.1 Fuel filter (1) may have the following location. On the left is a V6 model, on the right is a 4-cylinder model. Loosen the nut to remove the filter (2)
To replace the filter, the vehicle must be supported on axle stands. Clamp the hoses connected to the filter with special clamps before disconnecting them. First remove the hoses from the connections and only then remove the clamps. The clamps must remain.
Loosen the clamp nut and remove the filter. Install in reverse order. Install the filter as indicated by the arrow. Connect the rods, put on the collars and remove the clamps.