Front brake discs

Removal

• Remove the brake pads. When removing the caliper, do not disconnect the brake hose from it.
• Remove two bolts (4, fig. 12.6) fastening the brake mechanism to the steering knuckle.
• Remove the two Torx T30 bolts securing the brake disc to the front wheel hub (pic. 12.8).




Pic. 12.8. Location of the brake disc mounting bolts



• Remove the brake disc.

Installation

Notes

• Regrinding of brake discs is not permitted.
• If a brake disc needs to be replaced, both should be replaced to ensure uniform braking. When replacing brake discs, the brake pads must also be replaced.

• Clean the brake disc and hub from any remaining Loctite adhesive sealant.
• Install the brake disc onto the hub and secure it with two bolts.
• Apply Loctite FRENBLOC adhesive sealant to the caliper holder mounting bolts and tighten them to the specified torques.
• Press the brake pedal several times to press the brake pads against the brake disc.