Removal
- Remove the brake mechanism assembly.
- Remove the brake disc and hub.
- Remove the six axle mounting bolts.
- Remove the ABS sensor mounting bolt.
Installation
- Installation is carried out in the reverse order of removal.
- If axle bolts are reused, they should be coated with Loctite FRENBLOC.
- Tighten the axle mounting bolts in the sequence 1-2-3-4-5-6 to a torque of 30 Nm (rice. 11.5).
- Tighten the hub nut to 170 Nm
Attention. Before carrying out repairs on air suspension elements, it is necessary to reduce the air pressure with a valve. located on the tee under the car. It is prohibited to supply compressed air to the air spring through this valve. Only the compressor should fill the air spring with air.