Removal
- Disconnect the electrical connector (3, fig. 1.39) from the fuel level sensor and pliers Mot. 1265 disconnect return tubes (4) and submission (5) Fuel Pliers Mot. 1265 disconnect the quick connector of the pipeline. connecting the fuel tank to the filler neck.
Pic. 1.39. Fuel filter: 1 - quick-release connections; 2 - fuel filter mounting screws; 3 - electrical connector; 4 - fuel return pipe; 5 - fuel supply pipe
- Remove the fastenings of the filler neck and return pipe.
- Support the fuel tank.
- Remove two bolts each and remove the fuel tank securing straps.
- With an assistant, carefully remove the fuel tank.
Installation
- Installation is carried out in sequence. reverse to withdrawal.
- Avoid pinching the tubes as this may cause a leak.
- Make sure there are two O-rings, manually connect the quick connects and make sure they click securely.
- Ensure that the thermal insulation shield is installed correctly.