Drain the engine oil.
Remove the oil filter.
Install Pipe Pliers (Ms. 583) to oil-water cooler hoses (1).
Disconnect the cooling system hose clamps (2) from an oil-to-water cooler.
Disconnect the cooling system hoses from the oil-water cooler
Remove:
- nipple (3) oil-water cooler;
- oil-water cooler;
- oil-water cooler gasket.
Clean and degrease the oil-water cooler mating surfaces with a cleaner.
Replace the oil-water cooler gasket.
![]() | ![]() |
When installing, torque the oil-water cooler pipe to 49 Nm.
Install the parts in reverse order.