Attention! When disconnecting the fuel line, take protective measures (with a rag) from fuel emissions due to the presence of residual pressure in the system.
Removing
1. Disconnect the battery.
2. Remove the air filter.
3. Disconnect the pipeline 1 fuel supply.
4. Disconnect the fuel return lines.
5. Disconnect the fuel pressure regulator lines.
6. Turn out three bolts of fastening of a fuel-distributing stage.
7. Remove the fuel distribution rail. To remove the injector, first remove the clamps, then remove the injector.
Installation
1. Replace O-ring seal on injector base.
Note. If the injector was disassembled, then also replace the O-ring of the injector head.
2. If the couplings are correctly connected, the fuel supply line should be stripped with a click when they are connected.
3. Installation is made in an order, the return to removal.