Removing
After removing the inner lining, remove the inner glass sealing strip A and the glass holder B.
Remove the glass from the axis of the power window drive slider
Lower the glass to the bottom of the door frame
Remove the two fixed-pillar lower mounting bolts C.
Remove:
- incomplete door guide groove;
- fixed strut top bolt D (Torx T 20 mm) turn it around (1/4 turn), to remove from the door box;
- sliding glass;
- fixed glass, being careful not to pinch the outer sealing profiled glass strip.
Installation
Check the installation of the two fasteners E of the inner lining before installing the fixed glass.
Then proceed 8th order, reverse to removal.
Note. The fixed window can only be removed after the sliding window has been removed.