2. Disconnect the negative battery terminal.
3. Remove the engine protection tray.
4. Drain engine coolant (see chapter "Cooling system").
5. Remove the front right wheel.
6. Remove the front right fender liner.
7. Remove attachment drive belt (see relevant section above).
8. Remove the crankshaft pulley (see relevant section above).
9. Remove the timing belt (see relevant section above).
10. Remove the air filter unit (see chapter "Intake and exhaust system").
11. Remove intake manifold (see chapter "Exhaust intake system").
12. Remove ignition coils.
13. Unhook the electrical wiring from the rocker cover.
14. Remove rocker cover (see previous section).
15. Disconnect the upstream oxygen sensor connector (1).
16. Remove the mount (2) from the upstream oxygen sensor connector.
17. Disconnect the coolant temperature sensor connector (3).
18. Remove coolant hoses (4) from the cooling chamber.
19. Loosen the bolts (5) from the flange of the high-rise pipeline and the bolt of the rack (6).
20. To turn away bolts of a head of the block of cylinders.
21. Remove the cylinder head with gasket.