Removing
1. Open the trunk lid/tailgate, then remove the three or six upper bumper screws (depending on the model) (refer to accompanying illustration).
2. Remove the screws securing the rear wheel arch liners to the ends of the bumper (refer to accompanying illustration).
3a. Loosen the side bumper bolts.
3b. Unscrew the central bolts of the bumper, noting the correct location of the brackets on the central bolts (refer to illustrations).
4. With the help of an assistant, carefully loosen the ends of the bumper and remove it from the car (refer to accompanying illustration).
Installation
1. Install in reverse order.