Alarm operation
If your car is equipped with a signaling device, you can select and save any speed value in the memory of this device (at least 25 km/h).
If this speed is exceeded, you will be warned by a signaling device.
The signaling device turns on periodically every 40 seconds during the entire time while the vehicle speed exceeds the value you set.
Storing the set speed
Accelerate the car to the speed you wish to store in the signaling device's memory. This speed cannot be less than 25 km/h.
Press the switch on the front panel to the left of the steering column, under the fuse box.
(This will turn on the control lamp built into the switch button).
Now the value of the speed you have chosen will be stored in the signaling device's memory even if the ignition is turned off.
To cancel this setting, press the switch again. (The control lamp will turn off).