Headlights high / low beam
Pic. 1.108. Removing covers: A, B - covers
Remove cover A or B. Disconnect connector 3 or 6 (pic. 1.108).
Pic. 1.109. Replacing headlight bulbs: 1 - iodine lamp H7; 2, 4 - spring clamps; 3, 6 – connectors; 5 - iodine lamp H1; 5 – control panel; 7, 8 - cartridge
Disconnect the spring retainer 2 or 4 and remove the lamp (pic. 1.109).
Do not touch the glass bulb of the lamp with your hands. Hold it by the metal base.
After replacing the lamp, make sure the cover is installed correctly.
When replacing the bulbs of the front position lights, remove the holder 7 to remove the bulb.
To replace the direction indicator bulb, turn socket 8 a quarter of a turn and remove the bulb.
Attention! For headlights equipped with polycarbonate glass, the use of lamps that do not emit ultraviolet rays anti UV 55 W is mandatory (Use of other bulbs may damage the headlight).
It is recommended to purchase a set of spare lamps in advance.
Headlight cleaning
To clean headlights equipped with polycarbonate glass, use a soft cloth or cotton.
If dry cleaning does not work, lightly dampen a soft cloth (or cotton wool) in soapy water and wipe the dirty areas, gently wipe the glass with a dry soft cloth.
The use of alcohol-based detergents is prohibited.