You will need: a flat-blade screwdriver, keys «by 10» and TORX T30.
2....and on the left, and then remove both lower parts of the mudguards (see «Removing and installing mudguards and engine crankcase protection»).
3. Remove the fender liner (see «Removing and installing wheel mudguards and fender liners»).
4. Remove the three screws securing the bumper to the subframe.
5. From the inside of the bumper, use a chisel to cut off the three rivets that secure the bumper to the body (on each side).
Note.
- This is how the rivets that attach the bumper to the body are located.
6. In the arches of both front wheels, unscrew one screw securing the bumper to the body.
7. Remove the four screws securing the trim to the radiator frame...
Note: The radiator grille is made in one piece with the front bumper.
8....and remove the front bumper.
9. Install the front bumper and all removed parts in the reverse order of removal.