Car steering Renault Scenic 1

Description of the steering structure
Steering consists of steering wheel A, steering shaft B, rack and pinion steering C and tie rods D and tie rod ends E (see illustration 17.0). 17.0 Steering controls The steering wheel is screwed to the steering shaft....

Airbags — precautions
1. Have the airbag system replaced or checked only by a specialist workshop. Changes to the design are strictly prohibited. 2. Replace the steering wheel with the safety unit installed only with types of steering wheels...

Steering wheel — removal and installation
Attention! Be sure to familiarize yourself with the safety precautions regarding work on the airbag system. Removing 1. Disconnect the wire terminal from the battery «masses» (-), and insulate the battery terminal. Read...

Transverse tie rod and the tip of the transverse rod
Special RENAULT tools are required for installation. Removing 1. Mark the position of the front wheels on the hub with paint. This will allow the assembly to set the balanced wheel in its original position. 2. Loosen...

Power steering pump — removal and installation
Removing Vehicles without air conditioning Attention! For vehicles with air conditioning, unscrew the power steering pump drive belt pulley, and then unscrew the three pump mounting bolts located behind the pulley. The...

Wheel installation
22.0 Collapse. The transverse tilt of the kingpin. Longitudinal inclination of the kingpin Optimum driving dynamics and the lowest tire wear can only be achieved with perfect wheel alignment. With increased and uneven...