Replacing the position lamp
Figure 8.22. Disconnecting the side light bulb connector
In the engine compartment, disconnect the connector from the parking light bulb (Figure 8.22). Turn the bulb housing counterclockwise and remove it from the headlight housing. The baseless type lamp is simply inserted into the socket. Check the condition of the rubber seal.
Replacing the front turn signal bulb
Figure 8.23. Disconnecting the turn signal lamp connector
In the engine compartment, disconnect the connector from the turn signal lamp (Figure 8.23). Turn the bulb socket counterclockwise and remove it from the headlight housing. Replace lamp. Carry out the remaining operations in the reverse order of removal.
Replacement of a lamp of the forward repeater of the index of turns
Figure 8.24. Removing the front turn signal repeater
Carefully pry the indicator off the front fender using a flat head screwdriver (Figure 8.24). Turn the lamp socket counterclockwise and separate it from the indicator housing. Replace lamp (baseless type). Install the pointer in the reverse order of removal.